It all began with a trip to Home Depot. These are the supplies I bought there:
These are the tools I purchased the first day. I included 10 foot sections of 1/2-inch PVC pipe, a bag of 1/2-inch PVC pipe elbows, and a cutting tool. I already had the tape measure and the Sharpie! The only thing I have gone back and purchased (besides more pipe and elbows) is the glue.
The first thing I did was measure out the pipe. I decided to make various sizes because-as I said earlier-my kids are various sizes. Each hurdle required 6 pieces of pipe and six elbows. I cut one set of pipes to equal 16 inches. One set equaled 20 inches and, after I went back to the store, I cut another set for 30 inches. (Thirty inches is the standard size for middle school hurdles.
After the pieces were cut, I fit them together.
After I fitted them together and made them square, I marked them with a Sharpie so they could be glued together and still be square. They need to be glued because they come apart when someone catches the edge with their shoe. (Yes, we learned this the hard way!)
When they were finished, this is what it looked like:
The first time through, I had two sizes. Everyone was able to jump over both of them. I went home and made one ten inches higher. The taller students cleared it well, too!
This is what it looked like when they were used:
This is such an easy thing to make and yet, the student involvement was incredibly high!
We will also be having relay races. The relay batons? Diving sticks I bought on sale at the end of summer.